Tuesday 29 November 2011

Using Omni-Gel to Transfer Images


I love transferring images onto wood, metal, terra cotta, towels, etc!  I think I've tried almost all of the ways out there!  

Here's another option that works especially well on tiles for coasters, metal cans and even wood!--Omni-Gel.  I purchased it at Michael's. 



Follow the directions on the bottle:

Print off an image using a laser printer (or make a laser copy at Kinko's) on white paper.  Use the regular image NOT the mirror image for this process.

Apply a smooth coat of Omni-Gel using a foam brush.  Go in one direction over the image and a good amount around the edges.

Let that dry, (it takes about 15 minutes) then go over everything in the opposite direction with another smooth coat.

Let that dry, then brush on a third coat diagonally. 
  
Graphics from The Graphics Fairy

After it's completely dry, set the paper in a bowl of water.  (I use a Dollar Store dish bucket)

 Let that sit in the water for about 15 minutes. (extra time in the water doesn't hurt)

 I put the wet image on a piece of wax paper or foil so it doesn't move much.

I used to use my finger in a swirling motion to remove the paper, then I started using a micro-fiber cloth.  It is SO much faster and easier!  You may need to spray it with water or dip it back in the bowl to keep the paper damp while you're removing it.






(Please excuse the different images here.  I was making a lot of things at once.)  :)   This graphic is also from The Graphics Fairy


You will want to get ALL of the paper off as it will look cloudy after you've finished your project (not good!)  if you've missed any.  Using the micro-fiber cloth really helped.  I let it dry a bit, then go back and add a little water to see if any additional paper comes up.




If I'm planning to adhere the image to wood or metal, I cut it to size at this point.  I cut right along the edge of the graphic for wood or metal projects.  If I'm going to use the image for coasters, I wait until I have applied it to the tile so it covers everything perfectly, then cut right at the edge of the tile.

Then apply a coat of Omni-Gel to the back of the image and set it on the can or wooden piece.  Smooth out all of the air bubbles and let it dry.




Here is an image applied to a wood box using the same technique.
Graphic from The Graphics Fairy


If you want to make fun coasters, start with a 4" tile.  I purchased mine for 38 cents each at Lowe's.




Apply self stick cork board to the back. I purchased a roll of it at Michael's.
 



 Use the above process using Omni-Gel.
 Graphic from Graphique on Etsy


 Apply the image onto the tile using the above process.  Set your scissors right on the edge of the tile and cut it.  It will be a little slippery as it's wet with Omni-Gel.  Rub the edges into the rough edges of the tile so they really won't show up.

When it's dry, sprinkle a little bit of salt on the tile and spray it with a clear sealant.  I've had the problem in the past with some tiles where wet glasses would stick to the tile.  It seems to work well to add the salt to solve this problem.

So now you've got several projects you can make with Omni-Gel transfers.  

Happy Crafting!

Pam

I am linking to the following parties:

Savvy Southern Style's Wow Us Wednesdays 

 


Photobucket The Graphics Fairy

Friday 25 November 2011

Try, Try Again--The Tale of Painting a Table




I found this table at a garage sale this summer for $5.
 
(For the table redo on the left, click HERE.  For the wall hanging redo, click HERE)


I wasn't sure what I wanted to do with it, so started by sanding it down.





I decided to try homemade chalk paint.  I mixed together 3 parts black paint,  1 part Plaster of Paris and a little bit of water.  I only did one coat, but decided that I did not like the look of it at all.  It was much more grey than I wanted.  Of course, this was after only one coat, so I'm guessing that it would've improved with more painting...



But, it wasn't the look I was going for, so back to sanding it down again.... 

 




I then sprayed it with Rustoleum 2x Flat Black paint.  After the first coat, I sanded it lightly on the top with 220 grit sandpaper.  I applied another coat of black and it looked pretty good.  After that dried, I finished by spraying the whole thing with Rustoleum's 2x Clear Gloss.  








I added this cute knob I found (I may have found it at Hobby Lobby, but it's been a long time and now I'm not sure.)





I put this old candy machine on it, along with some billiard balls in a jar and a plant.  I'm not sure that I'll keep this stuff on there, but it's a start. 




I would love to try redoing another piece with chalkpaint at some point, and I know that painting it all black might seem boring, but it works with the other furniture and accessories in the room.  And it looks a whole lot better than when I found it.  :)



Thanks for coming by!

Pam

I am linking to the following parties:

 




Monday 21 November 2011

Beachy Clock





My husband made some tops for the wine barrel tables that I posted about last week. You can see that post HERE.   As neat as the tops were, they just didn't look right on the bases.  I stained them the same, but because the wood was different in some way, it didn't stain the same color. 




I used Minwax Provincial, then sanded it all down a little.  I kept trying to match the barrels, but it wasn't going to work...


 So I used the wine barrels without the tops and set his project off to the side....



The other night it came to me that the top would make a neat clock.  I had purchased a lot of 3" starfish on ebay a couple of years ago and thought it would be fun to use them instead of  numbers on the clock.







My biggest problem was finding clock hands that were big enough.  I bought some at Michael's, but they were sooo tiny that you could hardly see them.  After searching online and finding some possibilities, but not being thrilled with paying $3 for the hands and $6 for shipping (and then waiting several days for them to arrive!), I remembered that I had some clocks I wasn't using, and luckily, one of them had hands that were pretty big.  


Because the wood was stained such a dark color, I needed light clock hands.  I spray painted them a sand color.






My husband routed out a spot in the back for the movement (so it wouldn't stick out from the wall too far) and attached hooks and a wire for easy hanging.  We did all of this before attaching the starfish to the front.



I then laid out the starfish around the edge.  The starfish are somewhat uniform in size, but some are flat and some aren't, some have all five "fingers" (legs?) the same size and some don't...  I just tried to evenly space them around the board and realized that they wouldn't be 100% perfect, but that was ok.




I used Tacky Glue to attach them.  I like it because it dries clear and doesn't burn the skin off of my fingers like a hot glue gun.  :)







We then attached the clock hands to the movement and hung it on the wall.  It was a really fun and easy project.  (The light spot that shows up in the pictures pointing to the "6" on the clockface doesn't show up like that in person.)  
 


Thanks for your visit!

Pam


I am linking to the following parties:


 






vif187
Chic on a Shoestring Decorating
Funky Junk's Saturday Nite Special http://www.thegrantlife.com/search/label/financial%20friday

Sunday 20 November 2011

Another Closet is Always a Welcome Addition






My husband wanted to add a closet to the 'man cave'.  I was all for it!  I love to have things organized and was thrilled when he said I could put whatever I wanted to put in there.  :)



Here is the 'before'.  We added that flooring when we first moved in and stored our bikes right there.  There had to be a better use for that space!



 The view from downstairs.






The mess from sanding drywall... This was after cleaning for quite awhile!  That drywall dust gets EVERYWHERE!





Prior to adding shelves.



Nice deep shelves to hold everything.



I am so happy to have a place to hang my vacuum hose. It's big and bulky and fits perfectly in here!



 Here's a view of the room while standing at the new closet.  







He had to make special concessions on the size and the way the door fit in due to the slope of the ceiling.  He really maximized the space.  I think it looks great! 







Thanks for your visit!

Pam

I am linking to the following parties:

 

The DIY Show Off